Need help?Do you have a question about the Elenco Electronics ST-3030 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Display Digits | 3.5 |
| Diode Test | Yes |
| Continuity Test | Yes |
| Transistor Test | Yes |
| Battery Type | 9V |
| Type | Digital |
| DC Voltage Range | 200mV to 600V |
| DC Current Range | 200µA to 10A |
| Resistance Range | 200Ω to 2MΩ |
Explains how to measure DC and AC voltage using the meter.
Details the procedure for measuring DC current with the clamp meter.
Provides steps for measuring AC current using the clamp meter.
Guides on how to perform resistance measurements with the meter.
Explains the process for measuring capacitance values.
Details how to perform diode tests and continuity checks.
Instructions for measuring frequency and duty cycle.
Steps to measure temperature using the meter.
Explains how to use the data hold function to freeze readings.
How to activate and use the meter's backlight feature.
Guide to using the relative measurement function for comparisons.
Explanation of how to switch between auto and manual ranging modes.
To Next Page
