Elenco Electronics ST-3030 - Introduction

4. Introduction
The Elenco
®
ST-3030 is a 3¾ (4,000 count) AC/DC digital clamp
ammeter and multitester. It performs the basic electrical
measurements required by service technicians. It measures
AC/DC voltages, AC/DC current and resistance. It also has a diode
test function and a continuity beeper. Other features include data
hold min/max memory and auto power off. It is overload protected.
5. Features
• 3¾ digit, 4,000 count display
• AC/DC clamp-on meter
• Auto/manual range
• Basic accuracy: 0.5%
• Diode check/continuity buzzer
• Relative measurement
• Data hold
• Back light
• Auto power off
• CE/LVD CAT III 600V
6. Specifications
DC Voltage 400mV/4/40/400V ±0.5%, 600V ±0.8%
AC Voltage 4/40/400V ±1.0%, 400mV/600V ±0.8%
DC Current 400A ±1.5%, 1,000A ±2.0%
AC Current 400A ±2.0%, 1,000A ±2.5%
Resistance 400Ω/4k/40k/400kΩ/4MΩ ±1.0%,
40MΩ ±2.0%
Capacitance
40nF ±3%, 400nF/4μF ±2.5%, 40/100μF ±5%
Frequency 10Hz - 10MHz ±1.0%
Duty Cycle 0.1% - 99.9% ±2.0%
Temperature –4
O
F - 302
O
F ±(5
O
F +2)
302
O
F - 1,472
O
F ±(3% +2
O
F)
-6-