To Next PageTo Next Page
Need help?Do you have a question about the Elenco Electronics M-2785 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Transistor Test | Yes |
| Continuity Buzzer | Yes |
| Square Wave Output | Yes |
| Display Type | LCD |
| Display Digits | 3.5 |
| Continuity Test | Yes |
| Battery Type | 9V |
| DC Voltage | 200mV/2V/20V/200V/1000V |
| AC Voltage | 200V/750V |
| DC Current | 10A |
| Resistance | 20MΩ |
Instructions to ensure safe operation and prevent impairment of safety features.
Caution against connecting test leads to current input terminals during voltage measurement.
Explanation of warning, caution, and high voltage symbols for equipment safety.
Description of the multimeter's capabilities and intended applications.
Highlights of the multimeter's functions, ranges, and design elements.
Details on display, polarity, operation/storage temperature, and battery life.
Accuracy and input limits for DC/AC voltage, resistance, and current measurements.
Instructions for performing diode forward voltage and transistor hFE measurements.
Procedures for measuring capacitance and continuity using the multimeter.
Steps to measure frequency accurately with the device.
Guides for performing DC/AC voltage and current measurements correctly.
Procedure for measuring resistance, including notes on accuracy and test lead resistance.
Key steps and cautions before operating the multimeter for measurements.
Identification and explanation of the multimeter's display and input jacks.
Instructions for replacing the battery and fuses, including safety warnings.
Steps for adjusting and calibrating the multimeter for accurate readings.
How to use the tilt stand for propping the meter and holding test leads.
