Need help?Do you have a question about the Elenco Electronics RS-400/K-37 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Manufacturer | Elenco Electronics |
| Model | RS-400/K-37 |
| Accuracy | ±1% |
| Power Rating | 0.5W |
| Resistors | Metal Film |
| Switch Type | Rotary |
| Connectors | Binding Posts |
| Resistance Steps | 1Ω |
Lists all resistors by value, color code, and part number.
Lists all other components and hardware required for the kit.
Visual guide to identify switches, nuts, washers, and clips.
Explains how to read resistor color bands for value and tolerance.
Overview of soldering techniques, safety precautions, and tool recommendations.
Guidance on placing components onto the PC board before soldering.
Detailed steps for soldering resistors onto the PC board as per the diagram.
Mounting switches, connecting test leads, and installing knobs.
Procedure to verify resistor values using a meter after assembly.
Electrical blueprint of the resistance substitution box circuit.
To Next Page
