ELEVATE BC-4040-2-EF - Assembly Instructions; Assemble the carrier frame; Place the vertical arm

Page 3070621 1-888-651-3431
Step 1. Assemble the carrier frame by connecting the support base assembly (#1) and horizontal arm
(#2) using an M10 carriage bolt (#4), L pin (#3), M10 at washer (#5), and an M10 lock nut (#6).
Turn the L pin (#3) 90 degrees to lock the horizontal arm (#2). See Figure 1.
ASSEMBLY INSTRUCTIONS
Step 2. Place the vertical arm (#7) into the U bracket of the support base assembly, using an M10
carriage bolt (#4), L pin (#3), M10 at washer (#5), and an M10 lock nut (#6). With the vertical arm
(#7) in the vertical position, insert the L pin (#3). Turn the L pin 90 degrees to lock the vertical arm.
See Figure 2.