ELEVATE BIKE-STAND-6 User Manual

Page 1Rev. 032720
1-888-651-3431
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Do not use this product for any purpose other than that for which it is intended.
• Parts and/or instructions are subject to change without notice.
Safety
• Do not exceed the capacity of 180 lbs./30 lbs. per bicycle. Do not use with more than 6 bikes.
• Be aware of dynamic loading! Sudden load movement may briey create excess load causing
product failure.
• Keep assembly area clean and well-lit. Keep bystanders out of the assembly area.
• Do not assemble when tired or when under the inuence of alcohol, drugs or medication.
• Use safety goggles and work gloves during assembly.
• Do not stand on the product.
• Do not move the stand with bicycles suspended. Remove bicycles before moving the product.
• Maintain balance. Be sure that weight is evenly distributed on the support bar at all times.
• Do not use to store powered bicycles (electric/gasoline), scooters, or motorcycles.
• This product is not a toy. Do not allow children to play with or near this item.
• Do not store in damp or wet locations. Do not expose to rain.
• Maintain product labels and nameplates. These carry important safety information.
Bicycle Stand
Instructions for
Part # BIKE-STAND-6

ELEVATE BIKE-STAND-6 Specifications

General

Brand	ELEVATE
Model	BIKE-STAND-6
Category	Racks & Stands
Language	English

Summary

General Guidelines

Safety Precautions

Parts List

Assembly

Step 1. Attach Support Bar to Upper Post

Attach the Support Bar to the Upper Post using bolts and lock nuts.

Step 2. Attach Casters to Bases

Secure the Casters to the ends of Base A and Base B with lock nuts.

Step 3. Position and Secure Bases

Align and secure Base A and Base B to the Lower Post using hex bolts and lock nuts.

Step 4. Attach Upper Post Assembly

Connect the Upper Post assembly to the Lower Post assembly with a hex bolt and lock nut.

Hanging Bicycles

Removing Bicycles

Moving the Stand

Maintenance and Cleaning

Product Warranty and Liability

General Product Warranty

Products are guaranteed free of defects in material and workmanship at time of receipt.

Warranty Period

Warranty is valid for one year from the date of product acceptance.

Warranty Service

Authorized Dealer will replace defective parts at no charge; purchaser pays for labor.

Warranty Limitations

Warranty excludes damage from misuse, alteration, accidents, or normal wear and tear.

Limited Liability

Dealer is not liable for indirect, incidental, or consequential damages arising from product use.