EasyManua.ls Logo

ELEVATE TBBC-4 User Manual

ELEVATE TBBC-4
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1Rev. 100220
1-888-651-3431
Truck Bed Bike Rack
Instructions for Part # TBBC-4
General Guidelines
It is the user’s responsibility to read and follow all instructions.
Keep these instructions with the product at all times and review before each use.
It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or pur-
chases the product.
Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and
free of defects.
Never modify this product in any way.
All circumstances cannot be addressed in these instructions. Please use common sense and practice gen-
eral safety measures when using this product.
Parts and/or instructions are subject to change without notice.
Part Description Quantity
A Left U-Frame 1
B Right U-Frame 1
C Left Main Rack Frame 1
D Right Main Rack Frame 1
E Frame Support Bar 2
Part Description Quantity
F Spacer Bar 2
G Bottom Support Bar 2
H Clip Pin 9
I Plastic Stopper 4
A B C D
E
F
G
H I
Parts
Question and Answer IconNeed help?

Do you have a question about the ELEVATE TBBC-4 and is the answer not in the manual?

ELEVATE TBBC-4 Specifications

General IconGeneral
BrandELEVATE
ModelTBBC-4
CategoryRacks & Stands
LanguageEnglish

Summary

General Guidelines

Parts List

Assembly Instructions

Step 1: Assemble Left Frame Section

Assemble the Left U-Frame, Left Main Rack Frame, and one Frame Support Bar.

Step 2: Connect Frame Bottoms

Connect the bottom of the U-Frame to the bottom of the Main Rack Frame using Clip Pins.

Step 3: Assemble Right Frame Section

Repeat Steps 1 and 2 to assemble the right section of the bike rack.

Step 4: Connect Frame Sections

Connect the left and right sections using Spacer Bars and Clip Pins.

Installation Steps

Step 5: Install Plastic Stoppers

Screw Plastic Stoppers onto the long wing bolts on the U-Frames.

Secure Rack in Truck Bed

Set the bike rack in the truck bed and adjust wing bolts to secure it.

Adjust V-brackets for Tire Support

Adjust V-brackets on the Main Rack Frame to support the top of the bike tire.

Using Tie-Down Straps

Recommended use of tie-down straps to further secure bikes.

Product Warranty and Liability

General Product Warranty

Products will be free of defects in material and workmanship under normal use.

Warranty Period

Warranty remains in force for one year from the date of the product's accepted delivery.

Warranty Service

Authorized Dealer will replace any defective or malfunctioning part at no charge.

Warranty Limitations

Warranty does not apply to products repaired, modified, or subjected to unusual conditions.

Limited Liability

Dealer is not liable for indirect, incidental, consequential, or punitive damages.

Related product manuals