elexxion claros pico - Technical data base unit

claros pico user manual V 2.1 page 27 of 34
12.5 Technical data base unit:
Power supply: 5V/DC, < 3.0 A
(with Friwo FW7556M/05 mains adapter supplied)
Fuses: No accessible fuses
Operating mode: Intermittent operation / 2 min ON / 1 min OFF
Protection class: I application part type B / IP 00
Wavelength: 808 nm +/- 10 nm
Max power output (pulse): 5 W
Max. power output (CW): 1.0 W
Pulse frequency: CW – 20.000 Hz
Pulse duration: 26 µs,50 µs, 150 µs
Aiming beam: 650 nm +/- 5 nm / < 1mW
Operating conditions: Temp. 15°C – 35°C
Rel. humidity 20 – 85 %
Air pressure: 800 – 1100 hPa
Storage/transport conditions: Temp. 5°C – 50 °C
Rel. humidity 10 – 85 %
Air pressure: 800 – 1100 hPa
12.6 Accuracy of values displayed:
output: +/- 20 % from value specified