PAIR RING LIGHT - WINDOWS
4. Select the Wi-Fi network which
Ring Light will be paired with. The
dropdown will show Wi-Fi
networks compatible with Ring Light
(2.4/5Ghz A,B,G,N with
WPA/WPA-2 encryption)
5. Enter the password of the Wi-Fi
network and click on connect. The
computer will disconnect from the
current Wi-Fi network and connect
directly to Ring Light during the
pairing process. Internet
connectivity will be lost for
a few seconds.
6. Ring Light will turn off and on
again if pairing was successful.
7. Control Center will reconnect to
the network the computer was on
before pairing, and then wait 60
seconds for a Ring Light connection.
8. If Ring Light is properly paired and
connected to the network, Control
Center will show the Ring Light
controls.
To Next Page
Loading...
