Elgato RING LIGHT - Pair Ring Light - iOS

PAIR RING LIGHT - iOS
2. At the bottom of the
Wi-Fi settings, under
“Set up new device”
pick Ring Light. (The
device will be named
Ring Light with four
random letters or
number behind it
“Ring Light 8385”.)
3. Select the network that
Ring Light will be paired
with. Then hit next.
4. Ring Light will now
pair with the selected
network. If pairing is
successful, the setup
window will show “This
accessory joined
[Your Wi-Fi network].
1. Open the Wi-Fi settings
of the iOS device.
Turn on Ring Light.