6.1
Maintenance
Contents Page No.
6.1. Maintenance 6.2
6.1.1 Maintenance intervals 6.2
6.1.2 Maintenance of individual components & systems 6.3
6.1.2.1 Pre filter 6.3
6.1.2.2 Air filter 6.3
6.1.2.3 Air oil Separator 6.4
6.1.2.4 Oil top up and oil changeover 6.5
6.1.2.5 Oil filter 6.5
6.1.2.6 Intake valve 6.6
6.1.2.7 Blow down valve 6.8
6.1.2.8 Minimum pressure valve 6.8
6.1.2.19 Thermal valve 6.9
6.1.2.10 Electrical motor greasing 6.9
6.1.2.11 After and oil coolers 6.9
6.1.2.12 Cooler prefilter accessory 6.9
6.1.2.13 Drive coupling 6.10
6.1.2.14 Moisture separator and auto drain valve 6.10
6.1.3 Use only genuine spare parts 6.12
6.2. Troubleshooting 6.13
6.3. Decommissioning, dismantling & putting out of service 6.18
6.3.1 Waste disposal 6.18
6.3.2 Dismantling the compressor 6.18
6.3.3 Decommissioning the compressor 6.18
6.3.4 Disposal of consumables and replaced parts 6.18
6.4. ELGi services 6.19
6.4.1 ELGi customer care system (ECCS) 6.19
6.4.2 ELGi genuine spare parts 6.19
6.4.3 Air audit 6.19
6.5. Appendix 6.21
6.5.1 Conversion tables 6.21
6.5.2 Torque values 6.22
6.5.3 Service log book 6.23
6.6. Disclaimers 6.24
Maintenance 6.0
To Next Page
Loading...
