What to do if my ELICA Golden turns off after 10 seconds and beeps?
If your ELICA Hob turns off after 10 seconds and beeps constantly, it's likely due to water or kitchen utensils on the command zone. To resolve this, clean the command zone.
Why does my ELICA Golden show error ER21 - E/2?
If your ELICA Hob displays error code ER21 - E/2, this indicates that the temperature inside the electronic parts is too high. Allow the hob to cool down completely before using it again.
What to do if my ELICA Golden Hob displays error ER40?
If your ELICA Hob shows error code ER40, it means that the secondary voltage of the network is too low. Disconnect the hob from the mains and check the connection.
What to do if my ELICA Hob displays error ER47?
If your ELICA Hob displays error code ER47, it indicates that the power cable was either incorrectly connected or is faulty. Disconnect the hob from the mains and check the connection.
What to do if my ELICA Golden Hob displays error U400?
If your ELICA Hob displays error code U400, it signifies that a different voltage from that of the connection is detected. Disconnect the hob from the mains and check the connection.
General| Ignition Type | Automatic |
|---|---|
| Type | Gas |
| Finish | Stainless Steel |
| Material | Stainless Steel |
| Gas Type | Natural Gas / LPG |
| Width | 60 cm |
| Number of Burners | 4 |
Explains safety alert symbols, DANGER, and WARNING for hazard communication.
Lists critical safety measures to prevent fire, shock, and injury during operation.
Covers essential safety practices for electrical connections and appliance use.
Details voltage, grounding, wiring, and connection standards for safe installation.
Outlines necessary preparatory steps and advice before installation begins.
Lists and illustrates all parts provided with the product for installation.
Shows precise measurements and clearances for the 24-inch model.
Displays dimensions and required clearances for the 30-inch model.
Provides critical measurements and installation space needs for the 36-inch model.
Explains induction principles, advantages, and suitable cookware.
Offers recommendations for reducing energy consumption during cooking.
Covers pre-installation checks, cabinet preparation, and wiring.
Illustrates electrical connections for different voltage configurations.
Demonstrates applying the sealing strip to the hob.
Illustrates attaching mounting brackets to secure the appliance.
Shows how to install the rear support structure.
Details securing the rear support with screws.
Identifies and explains functions of buttons and displays on the control panel.
Details using core functions like ON/OFF, zone selection, and timers.
Explains features like Child Lock, Temperature Manager, and Pause mode.
Provides guidance on power levels, cooking types, and patterns for various foods.
Provides guidelines and precautions for cleaning the hob after use.
Lists common error codes, their causes, and recommended solutions.
Advises on steps before contacting customer service for issues.
Outlines the terms, coverage, and duration of the product warranty.
Details damages or issues not covered by the warranty.
To Next Page
