What to do if my ELICA Cooktop shows ERR03 error with acoustic signal?
If your ELICA Cooktop displays an ERR03 error and emits an acoustic signal, it indicates that water, pots, or kitchen tools are on the user interface. To resolve this, clean the surface and remove any objects that may be present.
Why does my ELICA Cooktop show error E2?
If your ELICA Cooktop displays 'E2', it means the temperature inside the electronic parts is too high. The suggested solution is to wait for the hob to cool down before using it again.
What to do if the ELICA NIKOLATESLA ONE interface switches off after 10 seconds?
If the ELICA Hob interface switches off after 10 seconds, it indicates continuous key activation. This is likely due to water, pots, or kitchen tools on the user interface. To resolve this, clean the surface and remove any objects that may be present.
Why does the ELICA NIKOLATESLA ONE Hob command zone switch off?
The ELICA Hob command zone switches off because the temperature inside the electronic parts is too high. To solve this, wait for the hob to cool down before using it again.
Instructions for cleaning the hob, extractor fan, and grease filters. Includes filter regeneration.
Lists common error codes, their descriptions, possible causes, and recommended solutions for the appliance.
Guidance on resolving issues, self-resolution checks, and contacting customer support for persistent faults.
General| Type | Induction hob |
|---|---|
| Number of Cooking Zones | 4 |
| Control Type | Touch Control |
| Energy Efficiency Class | A |
| Dimensions | 83 x 51 x 21 cm |
| Power Levels | 9 |
| Airflow | Up to 625 m³/h |
To Next Page
