To Next PageTo Next PageWhat to do if my ELICA Hob shows error E5?
If your ELICA Hob displays error E5, it indicates that electricity isn't reaching the module, possibly due to an incorrect connection or a faulty power cable. To resolve this, disconnect the hob from the electrical network and check the connection.
Why does my ELICA NIKOLATESLA FIT show error E2?
The E2 error on your ELICA Hob indicates that the temperature inside the electronic parts is too high. To fix this, wait for the hob to cool down before using it again.
What to do if ELICA NIKOLATESLA FIT Hob displays error E3?
If your ELICA Hob is showing error E3, it means there's a loss of magnetic properties. Remove the pot from the hob.
General| Width | 83 cm |
|---|---|
| Type | Induction |
| Control Type | Touch Control |
| Number of Zones | 4 |
| Max Extraction Rate | 620 m³/h |
| Energy Efficiency Class | A |
Important safety precautions for installation, use, and maintenance.
Details on voltage, cable length, conductor diameter, and earthing.
Requirements for built-in installation, distances from walls and units.
Steps for unpacking, checking product, and preparing cabinet.
Guidelines on suitable cookware, base flatness, and material for induction hobs.
Pan diameters, energy saving tips, and hob operation.
Information on external extraction and filter recirculation modes.
Identification and function of touch buttons and displays on the control panel.
Switching on/off, zone selection, power adjustment, booster, and key lock.
Safe activation, pot detection, and safety shut-down features.
Automatic heat up, temperature manager, pause, and timers.
Cooking zone timers, power limitation, and bridge zone features.
Switch on/off, speed, booster, auto operation, and filter indicators.
Resetting and activating filter saturation indicators.
Instructions for cleaning hob, extractor fan, grease, and carbon filters.
List of error codes, their descriptions, causes, and solutions.
Steps to take before contacting customer support.
