8
MAINTENANCE GUIDELINES
CLEANING
Frequent cleaning is recommended to ensure proper function, optimized light output, and an extended
life. The frequency of cleaning depends on the environment that the device operates in: damp, smoky
or particularly dirty environments can cause greater accumulation of dirt on the mirrored surface. Clean
the external surface at least every 20 days with a soft, dry cloth to avoid dirt/debris accumulation.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function and extended life. There are no user
serviceable parts inside these devices, please refer all other service issues to Eliminator Lighting.
Should you need any spare parts, please order genuine parts from Eliminator Lighting.
Please refer to the following points during routine inspections:
• Be sure all screws and fasteners are securely tightened at all times. Loose screws may fall out during
normal operation, resulting in damage or injury as larger parts could fall.
• Check for any deformations on the mirrored ball, rigging hardware, and rigging points (ceiling,
suspension, trussing. etc.) Damaged rigging points or unsecured rigging could cause the
devices to fall and seriously injure a person(s).
! !
To Next Page
Loading...
