Eliminator 011-2002-8 User Manual

12V DC
SOCKET
Battery
batterie
Bouton de
vérification de la
capacité de la
capacity
check button
Correct connection
Charging status
Charged
USB port
OFF / ARRÊT
Port USB
du port USB
011-2002-8
Chargée
Charge en cours
AC/USB on indicator
USB on indicator
Voyant d’utilisation
Voyant d’utilisation
de la prise USB/CA
État de la charge
Raccordement correct
Reverse connection
Raccordement inversé
PowerBox
PowerBox
120 W
300
Power Pack With Inverter
011-2002-8
Inverter
Crank Assist AMPS
ampères au démarrage
Onduleur-bloc d’alimentation
Onduleur
MD
INSTRUCTION
MANUAL
POWER PACK WITH
INVERTER
model no. 011-2002-8
IMPORTANT:
This manual contains important safety and
operating instructions. Read all instructions and
follow them with use of this product.

Eliminator 011-2002-8 Specifications

General

Brand	Eliminator
Model	011-2002-8
Category	Inverter
Language	English

Summary

Important Initial Information

Abbreviations and Acronyms

Important Safety Guidelines

Shock and Fire Hazard Precautions

Fire Hazard Details

Explosion and Fire Hazard Details

Preventing Equipment Damage

Battery Safety Precautions

Battery Shock and Fire Hazards

Chemical Hazard Precautions

Rechargeable Appliance Safety

Rechargeable Appliance Equipment Damage

Battery Recycling and Disposal

Key Parts List

Front Panel Components

Details the components located on the front panel of the power pack.

Side Panel Component

Boosting Power Switch

Controls the jump starting feature of the power pack.

Important Information Overview

Safety Features and Overload Protection

Describes built-in safety mechanisms like overload and overheat shutdown.

Power Pack Component Details

Details the function and purpose of various power pack components.

Indicator and Port Descriptions

Charging and Connection Status Indicators

Indicates charging status, reverse polarity, and correct connection.

Power Output Ports and Indicators

Describes AC outlet, USB port, and AC/USB availability.

Battery Status and Charging Ports

Details battery capacity indicators and the charging input port.

Trouble Loads Identification

High Surge Load Considerations

AC Appliance Run Time Estimates

Operating Environment Requirements

Packaging Contents List

Operation of AC Appliances

Operation of 12 V DC Appliances

Operation of USB Devices

Jump Starting an Engine

Recharging the Power Pack

Troubleshooting: Jump Starting and Charging

Power Pack Cannot Jump Start Vehicle

Addresses issues when the power pack fails to jump start a vehicle.

Charging Status LED Issues

Solutions for when the charging status LED indicates a problem.

Troubleshooting: Appliance Operation

AC Appliance Not Operating or Alarming

Diagnoses problems with AC appliance operation, sound alarms, and run times.

Short Appliance Run Times

Explains reasons for shorter than expected appliance run times.

Troubleshooting: Interference Issues

Audio System Buzzing

Troubleshoots buzzing sounds in audio systems powered by the inverter.

TV Signal Interference

Addresses issues with TV signal reception when using the power pack.

Technical Specifications

Electrical Specifications

Lists output power, voltage, frequency, and waveform details.

Physical Specifications

Provides dimensions and weight of the power pack.

AC Charger Specifications

Lists input/output voltage and current for the AC charger.

Product Warranty Details