What to do if Elinchrom ELB 500 Camera Accessories have battery current fault?
If you are experiencing a battery current fault (battery current overtime) with your Elinchrom Camera Accessories, restart the device after 2 minutes. If the problem persists, service is required.
What to do if Elinchrom Camera Accessories show a head error?
If you see a “head error” message, it might be because a Quadra head is connected instead of an ELB 500 head. Make sure you're only using the ELB 500 head with the ELB 500 TTL unit. Never plug any heads from other brands into this unit because it could damage both the unit and the head due to dangerous voltages.
Why are no LEDs lighting up on my Elinchrom ELB 500?
This issue occurs when the charging process isn't working, or the charger is faulty. Please contact your local EL distributor for assistance.
What to do if Elinchrom ELB 500 have unstable voltage?
If you are experiencing unstable voltage (charge hold error) with your Elinchrom Camera Accessories, restart the device after 2 minutes. If the problem persists, service is required.
What to do if Elinchrom ELB 500 Camera Accessories have charge timeout?
If you are experiencing a charge timeout with your Elinchrom Camera Accessories, restart the device after 2 minutes. If the problem persists, service is required.
What to do if Elinchrom Camera Accessories have capacitors over voltage?
If your Elinchrom Camera Accessories show a capacitors over voltage error, restart the device after 2 minutes. If the problem continues, service is required.
What to do if Elinchrom Camera Accessories have ignition voltage error?
If your Elinchrom Camera Accessories show an ignition voltage error, restart the device after 2 minutes. If the problem persists, service is required.
Warns about potential epileptic reactions from flashing lights and advises consulting a physician.
Provides crucial safety guidelines for battery usage, handling, and storage.
Outlines dangers related to the battery's electrical, chemical, and mechanical properties.
Covers general hazards like storage, environmental exposure, and misuse.
Safety guidelines for handling hot flash tubes and LED modelling lights.
Overview of the battery pack's key features and specifications.
Explains the battery's protection system for automatic disconnection during faults.
Identifies and explains the functions of the battery pack's interface and components.
Step-by-step guide on how to connect and disconnect the battery pack.
Details on how to charge the Li-Ion battery using the provided charger.
Information on the time required to charge the battery to 90% and factors affecting it.
Explains how to check the battery's remaining capacity via indicator lights.
Features and design aspects of the ELB 500 flash head, including cable and shaft.
General| Power Output | 500 Ws |
|---|---|
| Color Temperature | 5600 K |
| Battery Voltage | 14.4 V |
| Battery Charging Time | 2.5 hours |
| Sync Speed | 1/8000s |
| Wireless Control | Yes |
| Recycling Time | 0.05 to 1.6 sec |
To Next Page
