TEMPERATURE PRECAUTIONS
To prevent overheating the product should not be
covered whilst in charge mode or in general use! Do not
use, charge or leave the Battery unit near a heat source
(+60°C or higher) such as an open re, a heater or direct
sunlight. If the Battery unit has been exposed to very
cold conditions, sudden exposure to warm or humid air
may cause condensation and malfunction.
FLASH TUBES AND LED-MODELLING LIGHT SAFETY
NOTICE
• Flashtubes and the LED-Reector dishes may become very hot during
and after use!
• Never touch a ash tube or exchange it before the unit has cooled down
and is disconnected from the pack.
• Do not re ashes from short distances directed towards a person.
• Do not use near ammable / explosive material.
User manual ONE ELINCHROM — 13
To Next Page
Loading...
