Elite Screens Insta-DE 2 Series - Whats in the package; Parts List Overview; Model Number Variations; Eraser Recommendation

What’s in the package
Please make sure all parts listed below are included.
a b c d e
f g h.
Model Number
No powder bag
1 bag(25g)
2 bags (50g)
3 bags (150g)
IWB86VW2
X
IWB97XW2
X
IWB105HW2
X
IWB4.2x10W2
X
IWB4.2x20W2
X
IWB4.2x30W2
X
Notes: For best results and maximum product longevity, ALWAYS and ONLY use a high density whiteboard Eraser.
Preparation
The Insta-DE 2 product is to be solely installed on flat surfaces. Prepare the flat wall/surface by cleaning
the entire area. Do not install if any imperfections are found on the surface such as drilled holes, glue/tape
residue, dents, etc. We recommend sanding the area first to make sure you have a clean flat and smooth
surface. Failure to remove such imperfections can damage the product. The dry erase function of this
product requires a smooth writeable surface and Elite Screens is not responsible should these instructions
are not be properly followed.
Take the Insta-DE 2 film roll out of the package and unroll it on a clean surface and lay it on its front side.
Parts List
QTY
a. Insta-DE 2 Screen Material Film Roll
1
b. Double-sided adhesive tape
1
c. Self-stick cradle
1
d. Whiteboard pens
2
e. High density eraser
2
f. Microfiber cleaning cloth
1
g. Black velvet border adhesive strip roll
1
h. Powder compound (xanthan gum)
See chart below for details
1-3