Elite Screens Sable Frame 2 Series User Manual

Rev.V04152023DT (DS0245)
www.elitescreens.com
1
Sable Frame 2/B2 Series
Fixed Frame Projection Screen
User’s Guide – H Type
Thank you for choosing an Elite Screens fixed frame projection screen! Please read through this user guide before
utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points below
to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
Hardware and Parts List
a: Frame parts x 6 pcs
(Springs pre-installed)
b: Elbow Joints x 8 pcs
c: M5*6 screws x 40 pcs
d: Springs hook x 2 pcs
e: Tension Rods x 6 pcs
f: M5*50 wood screws x 8 pcs
g: Wall anchor x 8 pcs
h: Wall brackets x 4 pcs
i: Center support bar x 1 pc
j: Gloves x 2 pcs
k: Protection sheet x 1 pc
l: Screen Material x 1pc
m: Center joints x 2 pcs
※ Gloves (j) and Protection sheet (k) may not be included in some specific models.
Note: Please make sure all parts are included in your package before proceeding
to assemble the fixed frame screen.

Elite Screens Sable Frame 2 Series Specifications

General

Screen Type	Fixed Frame
Gain	1.1
Frame Color	Black
Frame Material	Aluminum
Frame Surface	Velvet
Screen Material	CineWhite
Viewing Angle	160°
Aspect Ratio	16:9
Installation	Wall-mounted
Screen Format	16:9
Available Sizes	100", 110", 120", 135", 150"

Summary

Frame Assembly

Using Gloves for Installation

Instructions on wearing gloves before starting the installation process.

Assembling Horizontal Frame Sections

Guidance on connecting center joints to horizontal frames and fastening with screws.

Attaching Elbow Joints to Vertical Frames

Steps for inserting elbow joints into the slots of the short vertical frame.

Connecting Long Frames to Assembly

Procedure for inserting horizontal long frames into elbow joints and securing them.

Attaching Screen Material to Frame

Preparing Screen Material

Unrolling the screen material onto a clean surface or protection sheet.

Inserting Tension Rods

Guiding tension rods into the edges of the screen material corners.

Distributing Frame Springs

Placing pre-installed springs into the designated holes on the screen material.

Securing Corners with Springs

Using a spring hook to attach the four corners of the screen to the frame.

Attaching Center Springs

Finalizing screen attachment by installing springs at center point locations.

Center Support Bar Installation

Inserting the Center Support Bar

Placing the center support bar into the top groove of the frame.

Completing Center Support Bar Placement

Sliding the top end of the bar into the center point for stability.

Wall Installation Procedure

Locating and Marking Installation Site

Finding a suitable wall location and marking drill-hole areas using a stud finder.

Drilling Wall Holes

Drilling holes in the wall according to the specified bit size for anchors.

Mounting Wall Brackets

Aligning wall brackets with drilled holes and securing them with screws.

Securing Screen to Wall Brackets

Positioning the frame onto top brackets and pulling down the bottom frame.

Caution and Safety Precautions

Screen Hanging Clearance

Ensuring the installation area is clear of obstructions like furniture or outlets.

Secure Mounting and Anchors

Using proper anchors and a structurally sound surface for weight support.

Handling Frame Parts

Advising careful handling of high-quality velour-surfaced aluminum frame parts.

Protecting Screen When Not In Use

Covering the screen with a furniture sheet to protect it from dirt and impurities.

Cleaning Frame Surface

Using a damp soft cloth with warm water to clean the frame surface.

Prohibited Cleaning Agents

Warning against using any solutions, chemicals, or abrasive cleaners on the screen.

Preventing Screen Damage

Avoiding touching the screen with fingers, tools, or sharp/abrasive objects.

Spare Parts Safety

Keeping spare parts out of reach of small children according to safety guidelines.