EasyManua.ls Logo

Elite Screens Saker Tab-Tension Series User Manual

Elite Screens Saker Tab-Tension Series
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MZ04242018 1 www.elitescreens.com
Electric Wall/Ceiling Projection Screen
Saker Tab-Tension Series
User’s Guide
Important Safety & Warning Precautions
Make sure to read this user’s guide and follow the procedures below.
Caution: The screen’s Black Top Drop is already set to its maximum drop limit. There is NO extra black-
matte drop material on the roller. Please be aware that altering the vertical limit switch to drop the screen
material off the roller voids your warranty with Elite Screens®. Unapproved changes or modifications (except
for cutting the power cord for hardwire installations) to this unit are prohibited and will likewise void your
warranty.
For more information, please contact our Technical Support Department at (877) 511-1211 Ext. 604.
Please retain this user’s guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, make sure the power connection is secure.
The power source should be close to the unit and easily accessible.
Do not install the unit on uneven, or inclined surfaces;
To avoid electrical shock or product damage, do not install this device in a damp place.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip hazard.
Avoid electrical shock or fire, by not overloading the power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. Consult an authorized technician instead.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure said cord has a compatible power rating.
Do not handle this or any other electrical device if you are wet or standing in water.
Whenever the screen reaches its end of life, follow local environmental guidelines regarding its
proper disposal.
Do not use this unit under the following circumstances.
Disconnect the power cord if exposed to moisture, rain, wind, electrical storms or snow.
Avoid exposure to direct sunlight or any of the conditions stated in the previous bullet point.
Keep away from fire or other high temperature heat sources.
Cut off the power supply first before attempting maintenance or removal.
Do not attempt to use this screen if there are obvious signs of damage.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.
Question and Answer IconNeed help?

Do you have a question about the Elite Screens Saker Tab-Tension Series and is the answer not in the manual?

Elite Screens Saker Tab-Tension Series Specifications

General IconGeneral
Gain1.1
Aspect Ratio16:9
InstallationCeiling or wall mount
CertificationsCE, RoHS
MotorizedYes
Screen TypeTab-Tension
Screen MaterialMaxWhite
Available Sizes100", 110", 120", 135", 150"
Control Method12V Trigger
Viewing Angle160 degrees
HousingAluminum
Voltage100-240V

Summary

Important Safety & Warning Precautions

Installation Preparation

Pre-Installation Steps

Steps to prepare for screen installation, including unpacking and handling.

Hardware Parts List

List of all included hardware components for installation.

Installation Instructions

Wall Mount Installation

Instructions for mounting the screen on a wall.

Ceiling Mount Installation

Instructions for mounting the screen on a ceiling.

Suspended Installation

Instructions for suspending the screen using eyebolts and links.

Controls and Operation

Screen Tension Adjustment

Guide on how to adjust the screen material tension.

Screen Operation Methods

Details on the six methods to control the screen's operation.

Related product manuals