Elite Screens Starling Tab-Tension 2 Series User Manual (English)

To Next Page

Rev.V02182023DT (DS8598) 1 www.elitescreens.com

Starling Tab-Tension 2 Series

Electric Wall/Ceiling Projection Screen

For: CineWhite® (Matte White) and CineGrey 4D

(Ceiling Ambient Light Rejecting) models

User’s Guide – E/H Type (RC1)

V1.0

Visit www.elitescreens.com for the latest updated version

_______________________________________________________________________________________________________________________________

Important Safety & Warning Precautions

Make sure to read this user’s guide and follow the procedures below.

Caution: The screen’s Black Top Drop is already set to its maximum drop limit. There is NO extra black drop material

in the roller. Please be aware that altering the vertical limit switch to drop the screen material off the roller voids

your warranty with Elite Screens

. Unapproved changes or modifications (except for cutting the power cord for

hardwire installations) to this unit are prohibited and will void your warranty.

For more information, please contact our Technical Support Department at www.elitescreens.com

• Please retain this user’s guide for future reference.

• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the

manufacturer.

• Handle the unit carefully during transportation to avoid any damages.

• To ensure safe and reliable operation, make sure the power connection is secure.

• The power source should be close to the unit and easily accessible.

• Do not install the unit on uneven, or inclined surfaces.

• To avoid electrical shock or product damage, do not install this device in a damp place.

• Do not place any heavy objects over the power cord.

• Position the power cord properly to avoid creating a trip hazard.

• Avoid electrical shock or fire, by not overloading the power cord.

• The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble this

unit by yourself. Consult an authorized technician instead.

• Make sure the power source that this unit is connected to has a continuous power flow.

• If there is need to use an extension cord, make sure said cord has a compatible power rating.

• Do not handle this or any other electrical device if you are wet or standing in water.

• Whenever the screen reaches its end of life, follow local environmental guidelines regarding its proper

disposal.

Do not use this unit under the following circumstances.

• Disconnect the power cord if exposed to moisture, rain, wind, electrical storms or snow.

• Avoid exposure to direct sunlight or any of the conditions stated in the previous bullet point.

• Keep away from fire or other high temperature heat sources.

• Cut off the power supply first before attempting maintenance or removal.

• Do not attempt to use this screen if there are obvious signs of damage.

• To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious

damage or if there are any evident broken parts.

Other manuals for Elite Screens Starling Tab-Tension 2 Series

Replacement Instructions2 pages

Need help?

Do you have a question about the Elite Screens Starling Tab-Tension 2 Series and is the answer not in the manual?

Elite Screens Starling Tab-Tension 2 Series Specifications

General

Format	HDTV
Diagonal	100 \
Drive type	Motorized
Screen gain	1.1
Native aspect ratio	16:9
Viewable screen width (W)	2214.9 mm
Viewable screen height (H)	1244.6 mm
Overall screen size (Height x Width)	190.75 x 239.01 cm
Case color	Black
Mounting type	Ceiling/wall
Product color	White