Frame Assembly
1. If gloves (j) were included in the package, please put them on before installation begins.
2. Insert the center joint (m) connector into to one of the 1/2 horizontal frames and fasten it with two M5*6 screws
(c). Repeat steps for assembling the second horizontal frame.
Center joints (m)
Oblique opening
Flat opening
M5*6 screws (c)
Note: a. Two ½ horizontal long frames should be assembled for a screen.
b. Do not tighten the screws completely until all frame pieces have been assembled correctly.
3. Insert both elbow joint (b) connectors into the short vertical frame into slot 1 and slot 2.
Short vertical frame
4. Then insert the horizontal long frames into the exposed elbow joint (b) connectors and fasten them with M5*6
screws (c).
Note: When assembled, please push simultaneously the two ends of the long frames.
Insert the exposed ends of the joint connectors into the frame and align the four corners so that they meet
at perfect right angles.
M5*6 screws (c)
To Next Page
Loading...
