PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India | Elite Screens China Ltd.
Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia 5
• The tubular motor equipped in the electric screen series Home 2, CineTension2, VMAX
Plus3/4, Kestrel and Raptor models feature an overheat protection sensor.
If the screen is consecutively brought up and down between 3-4 minutes, the motor
will automatically shut-off to prevent the motor from sustaining damage through
overheating. If the automatic shutoff is activated, please allow 30 minutes cool down
before resuming operation.
• The Kestrel Series Screen is equipped with a strong tension cross-spring system. Please
do not attempt any unnecessary repairs. It is at your own risk to open the inside cover
or dismantle/work on the screen. Individual modifications to this product are
prohibited and will void the user’s warranty.
• When using the screen, please
o Avoid strong wind, rain, or electrical storms.
o No direct sunshine (UV Radiation) or moisture.
o Keep away from fire sources and high temperature devices.
o Turn off t he power before moving this product.
NOTE:
• This equipment has been tested and found to comply with the limit s for a Class B digital
device pursuant to Part 15 of the FCC Guidelines.
• The products are designed t o provide reasonable protection against harmful
interference in a residential/commercial installation and end user application and may
radiate radio frequency energy.
• However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Keep hands clear from the closing panels
To Next Page
Loading...
Need help?
General
