Keep Working
www.ELITETOOLS.co
1. Security
Risk of electric shock or electrocution:
The entire instruction manual must be read. Ignoring these instructions may create a risk of elec-
tric shock, fire and / or severe injury. It is also recommended to read the accident prevention
regulations of the metalworking industry workers association (BGV D1, BGI 855, etc.).
Electric arc welding is a dangerous activity, both for those who apply it and for third parties. You
should always wear adequate protection when welding and handling a welding machine. For
more information, see the operator's safety guidelines in accordance with the manufacturer's
accident prevention requirements.
Body contact with electrically active parts of the machine or its accessories (electrodes, electro-
de holders, torches, work clamps) can cause an electrical shock that can be fatal or cause
serious injury.
• Do not use the machine in the rain or snow.
• Do not touch the electrodes or welding accessories with your bare hands.
• Always wear insulated welding gloves, making sure they are dry and in good condition, without
breaks or perforations.
• Electrically isolate the work area so that people are protected. Do not remove the case of the
machine or manipulate it internally when it is connected to the power supply.
• Only connect the machine to a 220 Volt 50 / 60Hz AC power source.
1
To Next Page
Loading...
Need help?
General
