Keep Working
www.ELITETOOLS.co
30
TIG AC PULSED
TABLA DE PARAMETROS PARA TIG AC PULSADO
1. Choose TIG AC mode
2. Select pulsed arc function.
3. Select the type of arc ignition in TIG Lift Arc, High Frequency (HF)
4. Selection of 2T / 4T torch activation.
5. Set pre-gas time.
6. Adjust the starting current.
7. Adjust the power rise ramp (rise time).
8. Maximum current setting (peak)
9. Minimum current setting (base)
10. Final Current.
11. Adjustment of the power down ramp (fall time).
12. Set the AC Pulse frequency.
13. AC pulse ratio adjustment (pulse duty-cycle).
To Next Page
Loading...
Need help?
General
