FUNCTIONS AND OPERATIONS:
AUTO ON /OFF:
The monitor will wake up automatically if the exercise machine is in motion. If you stop exercising over 4
minutes, monitor will turn off automatically.
RESET:
Press the button over 3 seconds will reset all functional values to zero except Odometer value.
SCAN:
Press the button until the monitor display SCAN. Monitor will automatically rotate display Speed,
Distance, Time & Calories every 24 seconds. Each display will be held for 6 seconds.
SPEED:
Press the button until the arrow points to SPEED. Monitor will display the current speed.
DISTANCE:
Press the button until the arrow points to DIST. Monitor will display the trip distance you are traveling.
TIME:
Press the button until the arrow points to TIME. Monitor will count up your riding time.
CALORIE:
Press the button until the arrow points to CAL. Monitor will accumulate the calorie consumption.
PULSE:
Press the button until the arrow points to PULSE. Monitor will display your current heart rate per minute.
Before measuring your pulse, place the palms of your hands on both of the contact pads and the monitor
will show up your current pulse per minute (BPM) in the LCD display.
SPECIFICATION:
Auto Scan Every 6 seconds
Speed Unit: KPH or MPH (According to inside setting)
Distance 0.1-999.9 Mile or KM (According to inside setting)
Time 0:00-99:59 (Minute: Second)
Calorie 0.1-999.9 Kcal
FUNCTION
Pulse 40-240 BPM
Sensor No-contact magnetic type
To Next Page
Loading...
