3.
4. Fix the Seat (8) to the Seat Post (7) using box wrench, then insert into the Main Body (1).
Line up the holes and secure the seat in position with the Adjustment Knob (12). The correct
height for the seat can be adjusted after the bike is fully assembled.
5. The Left and Right Pedal (9) & 10) are marked "L" and "R".
Connect the Pedals to the Crank Arms (11). The right pedal is on the right
hand side of the cycle as you sit on it. Note that the right pedal should be threaded
on clockwise and the left pedal on counter-clockwise.
To Next Page
Loading...
