ELITONE CAD-1114 - Page 31

31
FieldstrengthsfromfixedRFtransmitters,asdeterminedby
anelectromagneticsitesurvey
a
,shouldbelessthanthe
compliancelevelineachfrequencyrange.
Interferencemayoccurinthevicinityofequipmentmarked
withthefollowingsymbol:

NOTE1: At80MHzand800MHz,thehigherfrequencyapplies.
NOTE2: Theseguidelinesmaynotapplyinallsituations.Electromagneticpropagationisaffectedby
absorptionandreflectionfromstructures,objectsandpeople.
a)Fieldstrengthsfromfixedtransmitters,suchasbasestationsforradio(cellular/cordless) telephonesand
landmobileradios,amateurradio,AMandFMradiobroadcastandTVbroadcastcannotbepredicted
theoreticallywithaccuracy.ToassesstheelectromagneticenvironmentduetofixedRFtransmitters,an
electromagneticsitesurveyshouldbeconsidered.Ifthemeasuredfieldstrengthinthelocationinwhich
ELITONEisusedexceedstheapplicableRFcompliancelevelabove,ELITONEshouldbeobservedto
verifynormaloperation.Ifabnormalperformanceisobserved,additionalmeasuresmaybenecessary,
suchasre‐orientingorrelocatingELITONE.