ELITONE CAD-1114 - Page 30

30
Table3:GuidanceandManufacturer’sDeclaration–ElectromagneticImmunity–forequipmentand
systemsthatarenotlife‐supporting
ELITONEisintendedforuseintheelectromagneticenvironmentspecifiedbelow.Thecustomerortheuser
shouldassurethatitisusedinsuchanenvironment.
Immunity
Test
IEC60601
TestLevel
Compliance ElectromagneticEnvironment‐Guidance
RadiatedRF
IEC61000‐4‐3
10V/m
80MHzto
2.7GHz
10V/m
80MHzto
2.7GHz
PortableandmobileRFcommunicationsequipmentshould
beusednoclosertoanypartofELITONE,includingcables,
thantherecommendedseparationdistancecalculatedfrom
theequationapplicationtothefrequencyofthetransmitter.
Recommendedseparationdistance
d=1.2√P
d=1.2√P80MHzto800MHz
d=2.3√P800MHzto2.7GHz
WherePisthemaximumoutputpowerratingofthe
transmitterinwatts(W)anddistherecommended
separationdistanceinmeters(m).