Elkay , 2G, 3G LZSTLDWS 1G Series User Manual

To reset the lter count on original EZH2O bottle lling stations like the one above,
you will rst need to access the control board toggle switch.
To do this, you will need to rst open the top of the bottle ller by removing the
two screws on the top. They are hex type (non-security), so you will need
a 5/32 Allen wrench.
UH-OH...
You’ve changed the lter,
but the light is still red!
COMMERCIAL RESTROOM ACCESSORIES
Distributed By
WWW.RESTROOMDIRECT.COM
704•937•2673
129 Oak Park Dr., Unit A,
Mooresville, NC 28115

Elkay , 2G, 3G LZSTLDWS 1G Series Specifications

General

Brand	Elkay
Model	, 2G, 3G LZSTLDWS 1G Series
Category	Water Dispenser
Language	English