Elkay EZH2O EZSTLG8WS 1B Series User Manual

Page 1 1000001714 (Rev. M - 09/20)
EZSTLG8WS*1B LZSTLG8WS*1B
*Versatile Cooler Model LZSTLG8WSLK
conguration as shipped
*Versatile Cooler Model LZSTLG8WSLK
alternate installations
*Versatile cooler design allows units to be
installed either left-hand high and right-hand low
or left-low and right high.
Basin change may be required. See desired
rough-in to help determine if the basin change is
necessary.
EZ™ & LZ™ Stations versatile de Remplissage de Bouteille Série et Refroidisseurs
EZ™ & LZ™ Serie versatil Botella Bombas y Enfriadores
EZ
™
& LZ™ Series Versatile Bottle Filling Stations & Coolers
INSTALLATION & USE MANUAL
Manual de instalación y uso
Manuel d’installation et d’utilisation

Elkay EZH2O EZSTLG8WS 1B Series Specifications

General

Refrigerant	R134a
Power	115V/60Hz
Material	Stainless Steel
Product Type	Water Dispenser
Brand	Elkay
Model	EZH2O EZSTLG8WS 1B Series
Filtered	Yes
Filter Included	Yes
Cooling System	Compressor
Installation Type	Wall-mounted
Cooling Capacity	8 GPH
Bottle Filler Activation	Sensor Operated
Bubbler Activation	Push-button
Installation	Wall-mounted

Summary

Elkay Installation and Use Manual

EZ & LZ Series Bottle Filling Stations and Coolers Overview

Overview of Elkay EZ and LZ Series bottle filling stations and coolers.

Standard Rough-in: Left-Hand High, Bottle Filler Low Models

Alternate Rough-in: Right-Hand High, Bottle Filler Low Models

Alternate Rough-in: Right-Hand High, Bottle Filler High Models

Alternate Rough-in: Left-Hand High, Bottle Filler High Models

Installation Procedures

Hanger Brackets Installation

Instructions for mounting Elkay hanger brackets securely to walls.

Cooler Unit Installation

Steps for hanging the cooler unit onto the installed hanger bracket.

Exterior Panel Cleaning

Guidelines for cleaning exterior panels of Elkay EZ coolers using mild solutions.

Service Instructions

Shroud and Internal Component Access

Procedures for removing shrouds to access internal components for servicing.

Bubbler Unit Service

Steps for accessing and servicing the bubbler unit, including part removal.

Push Bar Switch Operation

Details on how push bar switches activate the solenoid valve for dispensing.

Bottle Filler Installation Guide

Control Board Programming

Alternate Bi-Level Unit Mounting

Assembly Precautions

Basin/Shroud Assembly Replacement Precautions

Key precautions for replacing basin/shroud assembly to ensure proper installation.

Wrapper and Trim Kit Installation

Plumbing Diagrams for EZ Bi-Level Coolers

Strainer Maintenance

Cleaning the Strainer

Procedure to clean the strainer by unscrewing the solenoid valve cap and rinsing.

Watersentry Plus Filter Detail

115V Parts List

Bottle Filler Replacement Part Kits