Elkay EZH2O LZS8WS 1A Series User Manual

Page 1 98550C (Rev. B - 8/10)
LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A
LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A
LZS8WS EZH2O BOTTLE FILLING STATION & COOLER
INSTALLATION, CARE & USE MANUAL
TM
LZS8WS Bottle Fillers are among the easiest to install on the market today. To
insure you install these models easily and correctly, PLEASE READ THESE
SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK
YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND
OTHER APPLICABLE CODES. After installation, leave these instructions with the
Fountain for future reference.
IMPORTANT
THIS IS AN INDOOR APPLICATION ONLY.
ALL SERVICE TO BE PERFORMED BY AN
AUTHORIZED SERVICE PERSON.
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES
IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE
BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELEC-
TROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER.
THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS
PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN
FROM THE BUILDING PLUMBING SYSTEM. WE SUGGEST THAT THE BOTTLE FILLING STATION AND WATER
COOLER BE PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI).
INSTALLER
TOOLS REQUIRED
BUT NOT PROVIDED:
SAFETY GLASSES
GLOVES
ELECTRIC DRILL
3/4” WRENCH OR CRECENT WRENCH
5/16” NUT DRIVER
UTILITY KNIFE
TAPE MEASURE
PENCIL
CENTER PUNCH
1/2” SOCKET & RATCHET WRENCH
5/32” ALLEN WRENCH

Elkay EZH2O LZS8WS 1A Series Specifications

General

Installation Type	Wall Mounted
Cooling Capacity	8.0 GPH
Filtered	Yes
Material	Stainless Steel
Bottle Filling Station	Yes
ADA Compliant	Yes
Product Name	Elkay EZH2O LZS8WS 1A Series
Category	Water Dispenser
Power	115V/60Hz
Brand	Elkay
Cooling Capacity Temperature	50°F
Voltage	115V
Finish	Stainless Steel
Refrigeration Capacity	8.0 GPH
Bubbler Activation	Push Button
Model	LZS8WS
Type	Water Cooler
Dispenser Type	Bottle Filling Station with Water Cooler
Certifications	NSF/ANSI 61, NSF/ANSI 372
Mounting Style	Wall Mount (On-Wall)

Summary

Installer Information

Tools Required

Lists tools necessary for installation that are not included with the product.

Bottle Filler Installation

Operation of Quick Connect Fittings

Explains how to connect and disconnect tubing using quick connect fittings.

Filter Maintenance and Control Board Settings

Changing the Filter

Step-by-step instructions for replacing the water filter in the unit.

Resetting the Visual Filter Monitor

Guide to resetting the visual filter status indicator after filter replacement.

Setting the Control Board - IR Sensor Range

Instructions to adjust the range of the infrared sensor for water dispensing.

Setting the Control Board - Resetting Bottle Count

Procedure to reset the unit's bottle counter to zero.

Filter Parts and Diagrams

Watersentry Plus Filter Parts List

Lists the components of the Watersentry Plus water filter system.

Water Filter Exploded View

Diagram illustrating the components of the water filter system.

Drain Mat Exploded View

Exploded view diagram of the drain mat and its components.

Drain Mat Assembly and Care

Instructions for assembling and maintaining the drain mat.

Replacement Part Kits

Lists available kits for replacing various components of the unit.