To Next PageTo Next Page
Need help?Do you have a question about the Elkay EZH2O LVRC8WS and is the answer not in the manual?
General| Installation Type | Wall Mount |
|---|---|
| Cooling Capacity | 8.0 GPH |
| Filtered | Yes |
| Refrigeration Type | Compressor |
| Material | Stainless Steel |
| ADA Compliant | Yes |
| Mounting Location | Wall |
| Power | 115V/60Hz |
| Model | LVRC8WS |
| Type | Water Dispenser |
| Cold Water Capacity | 8.0 GPH |
| Product Type | Bottle Filling Station |
| Certifications | NSF/ANSI 61, NSF/ANSI 372 |
Explains how to attach and detach tubing using push-in fittings and collets.
Steps to shut down, restart, and check the software designation (BF9 or BF11).
Instructions on how to locate and access the programming button on the control board.
Procedure to reset the visual filter monitor using the program button.
How to select between refrigerated and non-refrigerated unit types.
Steps to reset the bottle counter to zero and testing methods.
Steps to verify software designation, specifically BF11.
Instructions on locating the programming button on the bottle filler control board.
Procedure to reset the filter monitor for BF11/BF12 units.
How to adjust the IR sensor range from 1 to 10 for dispensing activation.
How to select between refrigerated and non-refrigerated unit types.
Steps to reset the bottle counter and testing procedures.
How to set the filter capacity to 3000GAL or 6000GAL.
