EasyManuals Logo

Elkay EZSTL8WSLVP User Manual

Elkay EZSTL8WSLVP
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
To reset the lter count on original EZH2O bottle lling stations like the one above,
you will rst need to access the control board toggle switch.
To do this, you will need to rst open the top of the bottle ller by removing the
two screws on the top. They are hex type (non-security), so you will need
a 5/32 Allen wrench.
UH-OH...
You’ve changed the lter,
but the light is still red!
COMMERCIAL RESTROOM ACCESSORIES
Distributed By
WWW.RESTROOMDIRECT.COM
704•937•2673
129 Oak Park Dr., Unit A,
Mooresville, NC 28115

Other manuals for Elkay EZSTL8WSLVP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Elkay EZSTL8WSLVP and is the answer not in the manual?

Elkay EZSTL8WSLVP Specifications

General IconGeneral
Product TypeWater Dispenser
BrandElkay
ModelEZSTL8WSLVP
MaterialStainless Steel
FiltrationYes
BubblerYes
ADA CompliantYes
Mounting LocationWall Mount
FinishStainless Steel
Hot WaterNo
Cold WaterYes
BottlelessYes
Cooling Capacity8 GPH

Related product manuals