Do you have a question about the Elkay EZS8WS 1G Series and is the answer not in the manual?
Model | EZS8WS |
---|---|
Category | Water Dispenser |
Number of Stations | 1 |
Material | Stainless Steel |
Finish | Brushed |
Filtration | Yes |
Voltage | 115V |
ADA Compliant | Yes |
Green Ticker | Yes |
Installation Location | Indoor |
Mounting Style | Wall Mounted |
Bubbler Activation | Push Button |
Activation Method | Push Button |
Cooling Capacity | 8 GPH |
Water Temperature | 50°F |
Installation | Wall Mounted |
Width | 18.0 in |
Series | 1G Series |
Attaching the cooler unit to the installed hanger bracket.
Procedures for initial unit operation after installation.
Guidelines for cleaning the exterior panels of the unit.
Procedures for removing the unit's protective covers.
Instructions for removing and servicing the bubbler assembly.
Information on switches located behind the unit's push bars.
Procedure to confirm the unit's control board software version.
How to locate and access the programming button on the control board.
Steps to reset the visual filter monitor indicator.
Adjusting the sensitivity range of the infrared sensor.
Selecting the unit type (refrigerated or non-refrigerated).
Procedure to reset the bottle count display to zero.
Configuring the unit for the installed filter's capacity.