To Next PageTo Next Page
Need help?Do you have a question about the Elkay LK3001 and is the answer not in the manual?
General| Model Number | LK3001 |
|---|---|
| Mounting Type | Wall Mount |
| Number of Filling Stations | 1 |
| Material | Stainless Steel |
| ADA Compliant | Yes |
| Warranty | 1 Year Limited |
| Flow Rate | 0.8 GPM |
Faucet ships with a 1.5GPM regulator; a 2.2GPM regulator is also included in the box for higher flow.
Shut off water supplies. Place spout through mounting hole in sink. Secure spout with rubber washer, metal washer and nut.
Place handle assembly through side hole in sink. Secure with washer and nut, ensuring slot faces up and handle swings equally.
Push diverter connector fully onto tube. Slide clip into diverter holes to secure the unit.
Insert hose guide through sink hole. From underneath, secure with mounting nut, avoiding overtightening.
Insert spray hose through guide and sink. Align and push quick connect housing onto receiving block; pull down to ensure connection.
Make connections to water lines using 1/2" I.P.S. faucet connections or coupling nuts with 3/8" O.D. ball-nose riser.
After installation, remove aerator, turn on water, open handle for one minute, check for leaks, then replace aerator.
Instructions for replacing the faucet cartridge, involving removing handles, set screws, and the cartridge nut.
Guide to switching the flow rate by disassembling the aerator assembly and installing a new aerator.
Guidelines for proper care and cleaning to maintain the product's appearance and function, avoiding damaging agents.
Details Elkay's limited lifetime warranty on faucet parts and finishes, coverage, exclusions, and how to obtain service.
Instructions on how to obtain warranty service, including contact information and required purchase details.
An illustrated list of all available replacement parts for the faucet model, including part numbers.
