Ellard Fire Door Control Panel

Need help?

Do you have a question about the Ellard Fire Door Control Panel and is the answer not in the manual?

Summary

Specification and Installation

Connection and Indication

Terminal Block Wiring

Provides comprehensive wiring details for all terminal blocks (TS1, TS1A, TS3A, TS3, TS4, TS5, TS6).

Fire Signal Connections

Explains connections and types for Main (Zone 1) and Local (Zone 2) Fire Alarm signals.

230 v AC Tubular Motors Connection

24 v d.c Tubular Motors Connection

JM Series Motors Connection

Other Motors with Built-on Controllers Connection

Relay Base Heat and Smoke Detector Connection

Solenoid Only or Power Closing Configuration

2 Stage Closing Configuration

Programming

Alarm Door Type Settings

Configures how the shutter closes upon receipt of a fire signal.

Alarm Zone Input Configuration

Sets the Main (Zone 1) and Local (Zone 2) fire alarm input types.

Delay Timers Configuration

Shutter Run Times Configuration

Photo Beam Programming

Configures photo beam operation, delays, retries, pauses, and reopening.

Repeater Panel Specification

Repeater Panel Connection Detail

Provides a detailed diagram of the repeater panel's connection layout.

Troubleshooting Guide

Display Messages and Solutions

Lists common display messages and their potential causes and solutions.