Ellis 90H - Blade Guide Assembly

B LADE G UIDE
Page 2
*On all saws, except for the Model 4000, the stationary and adjustable kits are the same except for items 6, 16, and 15 which are included with
the adjustable kits. On the Model 4000 there is no adjustable kit. Therefore, use part number 6747 for both bearing kits on the Model 4000.
Part Number For Models
900
1000
1200
90H
1100
1440
1500
1600
1800
2000
3000 4000
Item No. Description
Complete Assy. 9016DC 5370 5539 5720 5732 Blade Guide Assembly, Drive End
Complete Assy. 9016IC 5371 5519 5721 5733 Blade Guide Assembly, Idler End
1 9016I 5391 5588 5588 5981 Housing Assembly, Idler
2 5541 5541 5541 5541 5541 Adjustment Stud, Bearing Plate
3 4260 4260 4260 4260 4260 1/4-20 Hex. Nut
4 6066 6066 6066 6066 5999 Spindle, Pressure Bearing
5 4499 4499 4499 4499 4522 Ball Bearing, Pressure
6 4260 4260 4266 4266 4279 Nut, Hex.
7 4336 4336 4337 4337 4343 Lock Washer, Spring
8 4310 4310 4310 4310 4311 Flat Washer, SAE
9 4271 4271 4271 4271 4270 Wing Nut or Stop Nut
10 5389 5389 5587 6074 6073 Spindle, Guide Bearing
11 4522 4522 4502 4502 4515 Ball Bearing, Guide
12 4140 4140 4140 4140 8-32 x 3/8 Set Screw
13 4258 4258 4258 4258 4260 Hex. Nut
14 4155 4155 4155 4155 4137 Socket Head Cap Screw
15 4304 Flat Washer, 3/16 or 1/4 Std.
16 4355 4355 4356 4356 4343 Lock Washer
17 5374 5374 5542 5542 6056 Guide Clamping Bolt
18 9016D 5390 5540 5540 5982 Housing Assembly, Drive
19 9012 9012 9012 9012 5996 Pressure Bearing Assembly
20 5406 5406 6730 6742 6747 Stationary Guide Bearing Kit
21 5407 5407 6732 6743 6747 Adjustable Guide Bearing Kit
Blade Guide Assembly
Complete
Assembly
Complete
Assembly
Bearing Only