Need help?Do you have a question about the elmeasure PE5121 and is the answer not in the manual?
General| Frequency Range | 45-65 Hz |
|---|---|
| Accuracy | Class 1.0 |
| Power Consumption | < 5 VA |
| Operating Temperature | -10°C to +55°C |
| Humidity | Up to 95% RH (Non-condensing) |
| Mounting | Panel Mount |
| Type | Digital Power and Energy Meter |
| Current Input | 1A / 5A AC |
| Display | LCD |
| Communication Interface | RS485 (Modbus RTU) |
| Measurement Type | Voltage, Current, Power, Energy, Frequency, Power Factor |
| Dimensions | 96 x 96 x 46 mm |
Essential safety and installation guidelines for electrical metering equipment.
Critical safety precautions for handling and installing the meter to prevent injury.
Instructions for connecting voltage and current inputs to the meter.
General guidelines for meter installation location and sealing.
Procedure for inserting a SIM card into GSM/GPRS enabled meters.
Step-by-step instructions for programming various meter settings.
Details various communication-based options for prepaid metering.
Overview of different methods for meter communication.
Table detailing communication registers, data types, and addresses.
To Next Page
