Elmec EVduty EVCCS - EVCCS Module Advanced Network Settings

11
Conguration
d) WiFi Network SSID
(Optional) Select the WiFi network to which the EVCCS module is to connect.
Possible value: list of WiFi networks
Default value: disabled
e) WiFi Network SSID
(Optional) Manually enter the name of the WiFi network to which the EVCCS module is to connect.
Fill this box only if the target WiFi network does not appear for security reasons.
f) WiFi Network Password
(Optional) Password of the WiFi network to which the EVCCS module is to connect.
g) IP Address
(Optional) Local IP address of the EVCCS module. A value of 0.0.0.0 means that the EVCCS
module will obtain this information by DHCP.
Possible value: IPv4 address format "aaa.bbb.ccc.ddd"
Default value: 0.0.0.0
h) Default Gateway
(Optional) Default gateway of the EVCCS module. A value of 0.0.0.0 means that the EVCCS
module will obtain this information by DHCP.
Possible value: IPv4 address format "aaa.bbb.ccc.ddd"
Default value: 0.0.0.0
i) Subnet Mask
(Optional) Subnet mask of the EVCCS module. A value of 0.0.0.0 means that the EVCCS
module will obtain this information by DHCP.
Possible value: IPv4 address format "aaa.bbb.ccc.ddd"
Default value: 0.0.0.0
j) DNS Server
(Optional) DNS server of the EVCCS module. A value of 0.0.0.0 means that the EVCCS module will obtain this
information by DHCP.
Possible value: IPv4 address format "aaa.bbb.ccc.ddd"
Default value: 0.0.0.0
8. Once values have been correctly adjusted, click "Submit".