23
The receiver does not
appear in the list of
connection
destination.
・Miracast projection is in progress. During miracast projection other device cannot be
connected and is not displayed in the list of connection destination. The device will be
displayed in the list after the current miracast projection is disconnected.
・"Hide SSID" is set to ON in "Device name" in "Device management". Change the setting
or initialize the receiver.
Error message
appears when
entering the
password.
・Wrong password has been entered. (For example, uppercase letter is used for
lowercase letter or number “0” is used for alphabet “O”.)
Enter the password correctly.
IP address is not
displayed in the Home
screen.
・If the "Connection" setting in "Administrator settings" is set to "Via router only", the Direct
Link IP address will not be displayed. Change the setting.
・If the "Connection" setting in "Administrator settings" is set to "Direct link only",
Infrastructure IP address will not be displayed. Change the setting.
Password is not
displayed in the Home
screen.
・If the "Connection" setting in "Administrator settings" is set to "Via router only", the
password will not be displayed. Change the setting.
・"WiFi password" setting in "Network management" is set to "Hide password".
Change the setting.
SSID is not displayed
in the Home screen.
・"Hide SSID" is set to ON in "Device name" in "Device management".
Change the setting or initialize the receiver.
About long-term usage of this product
Due to the lifetime of its parts, if this product is used for longer than the warranty period, its performance and quality may
deteriorate. In this case, we will replace the parts for a charge. Consult the dealer from whom you purchased this
product or our nearest branch/office.
To Next Page
Loading...