Elmo Cast - Specifications; Hardware

24
➏ Specifications
◆Hardware
Model name
ELMO Cast
Network standards
IEEE802.11a/b/g/n/ac
By default, only 5GHz band can be used.
The 2.4GHz band and 5GHz band cannot be used simultaneously.
Protocol
TCP / IP, SNMP
IP address setting
DHCP（Auto）/ Manual IP address configuration
HDMI output resolution
4,096×2,160（24P）※1
3,840×2,160（24/25/30P）※1
1,920×1,080（24/50/60P）
1,280×720 （50/60）
「720p」「1080p」 progressive 60Hz display supported.
「720p」「1080p」 interlace-method not supported.
Interface
Video output：HDMI1.4
Power：USB Type C
Power supply
USB power supply（5V / 1.5A）
For stable operation, do not connect the dongle to the USB port of a TV or
projector or recording device. Use the supplied AC adapter.
Operating temperature
0～40℃
Power consumption
In standby status：3W
In projection：6W
External dimensions
Dongle：L97×W32×H11mm（HDMI connector not included.）
Package box：L134×W80×H72ｍｍ
Weight
Dongle：120g
Receiver+package box+ accessories：254g
※1 Video files such as mirroring video files (the operation screen of a computer or smartphone) is will be
displayed on TV at a maximum resolution of 1080p (1920x1080) after being scaled.