Elmo MX-1 - Page 2

MX-1 New Baseplate Installation Guide
2
To use the MX-1 Writing Board, slide the
baseplate of the MX-1 unit into one of the
two slots located on the bottom of the
Writing Board. This will keep the camera in
place as you write
The MX-1 Writing Board is now ready to be
used! Simply connect the MX-1 to the input
source of your choice.
When you are finished using the MX-1 and
Writing Board, the MX-1 unit can be folded
shut while it is still attached to the Writing
Board.
6
7
8