20
z
x
c
q
Drawing up the Bobbin Thread
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
However, you need to draw up the bobbin thread when
sewing gathering stitches etc.
z Raise the presser foot. Hold the needle thread lightly
with your left hand.
x Turn the power switch on.
Press the needle up/down button twice to lower and
raise the needle to pick up the bobbin thread.
q Needle up/down button
c Pull both threads 4˝ to 6˝ (10 to 15 cm) under and
behind the presser foot.
To Next Page
Loading...
