Why is the bobbin thread breaking on my ELNA Sewing Machine?
The bobbin thread on your ELNA Sewing Machine might break because: * The bobbin thread isn't threaded properly in the bobbin holder. * Lint has accumulated in the bobbin holder. * The bobbin is damaged and doesn't turn smoothly; if this is the case, change the bobbin. * The thread is wound loosely on the bobbin.
Why are stitches being skipped on my ELNA lotus 2 Sewing Machine?
Skipped stitches on your ELNA Sewing Machine can occur because: * The needle is inserted incorrectly, bent, or blunt. * The needle and/or threads aren't suitable for the material being sewn. * A blue tip needle isn't being used for sewing stretch, very fine fabrics, and synthetics; use the stretch stitch needle. * The needle thread isn't threaded properly. * A poor quality needle is being used; change the needle.
How to fix seam puckering on my ELNA Sewing Machine?
Seam puckering might happen on your ELNA Sewing Machine because: * The needle thread tension is too tight. * The needle thread isn't threaded properly. * The needle is too heavy for the fabric you're sewing. * The stitch length is too long for the fabric; shorten the stitch. * A stabilizer isn't being used when sewing very fine fabrics; apply a stabilizer.
What to do if the fabric is not feeding smoothly in my ELNA lotus 2?
The fabric might not feed smoothly through your ELNA Sewing Machine if: * The feed dog is packed with lint. * The stitches are too fine; make the stitch longer. * The feed dog isn't raised after “drop feed” sewing.
Why does the needle thread keep breaking on my ELNA lotus 2?
The needle thread may break on your ELNA Sewing Machine for several reasons: * The needle thread might not be threaded correctly. * The needle thread tension could be too tight. * The needle might be bent or blunt. * The needle might be inserted incorrectly. * The needle threads might not be set under the presser foot when you start sewing. * The thread might be too heavy or too fine for the needle.
Why does the needle break on my ELNA lotus 2 Sewing Machine?
Needles break on the ELNA Sewing Machine for a number of reasons: * The needle might be inserted incorrectly. * The needle clamp screw might be loose. * The threads weren't drawn to the rear after sewing. * The needle is too fine for the fabric you're using. * An inappropriate presser foot is being used; try using the correct foot.
Why are there loops on the seams of my ELNA lotus 2 Sewing Machine?
Loops might appear on the seams of your ELNA Sewing Machine due to: * The needle thread tension being too loose. * The needle being too thick or too fine for the fabric.
Why is the buttonhole sewing not working properly on my ELNA lotus 2 Sewing Machine?
Buttonhole sewing on your ELNA Sewing Machine might not sew properly if: * The stitch density isn't suitable for the fabric being sewn. * Interfacing hasn't been used for stretch or synthetic fabric; apply an interfacing. * The buttonhole lever isn't lowered.
Why is my ELNA lotus 2 Sewing Machine so noisy?
Your ELNA Sewing Machine might be noisy because: * Thread has been caught in the hook race. * Lint has built up in the hook race or bobbin holder.
Why did the auto thread cutting fail on my ELNA lotus 2 Sewing Machine?
Auto thread cutting might fail on your ELNA Sewing Machine if: * The thread is too thick for the auto thread cutting. * Threads have been caught in the thread cutter mechanism.
General| Brand | ELNA |
|---|---|
| Model | lotus 2 |
| Category | Sewing Machine |
| Language | English |
Instructions to reduce the risk of electric shock.
Instructions to reduce the risk of burns, fire, electric shock, or injury.
Identification of all functional parts of the sewing machine.
List of included accessories with part numbers for the sewing machine.
Information on where and how to store sewing machine accessories.
Instructions for opening, closing, detaching, and attaching protection flaps.
Explanation of free-arm sewing for specific mending tasks.
Steps for connecting the sewing machine to the power source.
Guidance on operating the sewing machine with the foot control.
Adjusting sewing speed using the speed control slider and foot control.
How to use the start/stop button for machine operation.
Using the reverse button for backstitching and locking stitches.
Functionality of the auto-lock button for securing stitches.
Control for positioning the needle up or down.
Function of the thread cutter button for trimming threads.
Adjusting stitch width and length for selected patterns.
Details shown on the LCD display during machine operation.
Operation of the touch panel for pattern selection and settings.
Selecting stitch patterns using the numerical keypad.
Navigating and selecting patterns with arrow keys.
Quick selection of specific stitch patterns via dedicated keys.
How to raise and lower the presser foot for fabric placement.
Procedure for removing and attaching different presser feet.
Steps for detaching and attaching the presser foot holder.
Balancing needle and bobbin thread tension for straight stitches.
Achieving balanced tension for zigzag stitches for optimal appearance.
Instructions for manipulating the feed dog for different sewing tasks.
Procedure for safely replacing the sewing machine needle.
Guidance on selecting appropriate fabric, thread, and needle combinations.
Steps to remove the bobbin from the bobbin case.
Correctly placing the thread spool on the spool pin.
Detailed steps for winding thread onto the bobbin.
How to correctly place and thread the bobbin into the bobbin holder.
Step-by-step instructions for threading the sewing machine.
Detailed instructions for using the automatic needle threader.
Method to bring the bobbin thread up to the needle area.
Configuring the audible buzzer alerts for machine operations.
Setting the needle to stop up or down after sewing.
Adjusting key sensor positions for improved touch panel response.
Calibrating the touch panel keys for accurate input.
Restoring all customized settings to factory defaults.
Performing basic straight stitch sewing techniques.
Techniques for starting, securing, and finishing seams.
Using the thread cutter button for clean thread trims.
Automated thread cutting after locking stitches.
How to pivot fabric to change sewing direction.
Tips for sewing from the edge of thick fabrics.
Utilizing seam guides on the needle plate for accurate seam allowances.
Method for sewing precise square corners on fabric.
Adjusting the needle's lateral position for straight stitches.
Modifying the stitch length for various sewing needs.
Using the lock-a-matic stitch for seam security.
Applying the locking stitch for invisible seam reinforcement.
Using the triple stretch stitch for durable and elastic seams.
A narrow stretch stitch for knit fabrics and bias seams.
Decorative stitches for creating unique looks on garments.
Versatile zigzag stitch for overcasting, mending, and decoration.
Adjusting the width of the zigzag stitch for different effects.
Modifying the length of the zigzag stitch.
Finishing edges on stretch fabrics prone to puckering.
A stitch suitable for knit fabrics, providing elasticity.
An industrial-style overlock stitch for assembling and finishing.
Procedure for attaching elastic to fabric using a decorative stitch.
Description of the widely used square buttonhole for medium to heavy fabrics.
Buttonhole suitable for fine to medium weight fabrics like blouses.
Buttonhole rounded at both ends for delicate fabrics.
Buttonhole suitable for larger buttons and heavier fabrics.
Buttonhole designed for stretch fabrics, also used decoratively.
Buttonhole resembling hand-worked style for fine fabrics.
Template for hand-sewn welted buttonholes.
Step-by-step guide for sewing a square buttonhole.
Adjusting the width of the buttonhole for different button sizes.
Modifying the stitch density of the buttonhole.
Sewing round-end and fine fabric buttonholes.
Procedure for sewing keyhole buttonholes.
Sewing stretch and antique style buttonholes.
Instructions for creating a corded buttonhole for added strength.
Detailed process for creating a welted buttonhole with a fabric patch.
How to perform darning stitches for fabric repair.
Correcting the evenness of darning stitches.
Using the tacking stitch for reinforcement of stress points.
Steps to create an eyelet for belt holes or decorative purposes.
Modifying the shape and evenness of the eyelet stitch.
How to attach the correct zipper foot for sewing zippers.
Steps for preparing fabric and placing the zipper.
Procedure for sewing the first side of the zipper.
Steps to complete the zipper installation by sewing the second side.
Instructions for creating a neat, invisible hem.
Steps for sewing buttons onto fabric using the machine.
Technique for creating a narrow, decorative rolled hem.
Method for gathering fabric for decorative or fitted effects.
Using stitches for patchwork to create precise seams and designs.
Using angle scales on the needle plate for precise patchwork angles.
Creating a decorative shell tuck effect on lightweight fabrics.
Sewing fine seams for lingerie and lightweight knit fabrics.
Applying applique designs onto fabric using decorative stitches.
Creating decorative pintucks on fabric for embellishment.
Adding fringe to fabrics for decorative accents.
Creating drawn work effects on fabric by removing threads.
Emulating cross stitch designs efficiently with the sewing machine.
Sewing over cords to create decorative borders and trims.
Using a single cord to gather heavy fabric effectively.
Joining fabric pieces with fagoting for an open-work appearance.
Creating French knots for decorative embellishments.
Sewing scallop stitches for decorative edges.
Applying decorative smocking patterns to garments.
A fast method for quilting small areas using a pre-programmed stitch.
Using the clasp stitch to join quilt layers securely.
Using satin stitches for decorative effects, with elongation options.
Adjusting the elongation ratio of stitches for varied lengths.
Tips for guiding fabric and using backing for decorative stitches.
Procedure for cleaning essential internal parts of the sewing machine.
Steps for correctly installing the bobbin holder after cleaning.
Adjusting feed for distorted stretch stitch patterns.
Interpreting warning signs and error codes for machine issues.
Understanding the meaning of different buzzer sounds.
Table of common sewing problems and their solutions.
To Next Page
