The Elna AIR ARTIST is a wireless embroidery machine designed for ease of use and connectivity with smart devices. This machine allows users to create and transfer embroidery designs wirelessly, offering a modern approach to home embroidery.
Function Description:
The Elna AIR ARTIST is primarily an embroidery machine that connects wirelessly to a smart device (smartphone or tablet) via a dedicated app. This wireless connectivity is a core feature, enabling users to manage designs, monitor embroidery progress, and control the machine directly from their smart device. The machine supports two wireless connection modes: Access Point Mode, where the smart device connects directly to the embroidery machine, and Client Mode, where both the smart device and the embroidery machine connect to a wireless LAN router. This flexibility allows users to choose the most convenient connection method for their environment. The app provides a real-time display of the embroidery process, including needle position, stitch count, and thread color information. Users can also check the status of the machine and transfer embroidery data wirelessly. The machine is designed to handle various embroidery tasks, from monogramming to intricate designs, with features aimed at ensuring high-quality results.
Important Technical Specifications:
While specific detailed technical specifications like motor power or exact dimensions are not explicitly listed in the provided pages, several operational and design-related specifications can be inferred:
- Wireless Connectivity: Supports Wi-Fi for connection to smart devices in both Access Point and Client modes. The MAC address for wireless LAN connection is the last 6 digits of the lower code printed on the sticker on the rear cover of the embroidery machine. The default password for Access Point mode is "12345678".
- Needle Type: The recommended needle is the blue tip needle (Part #813404013). Organ needle HA x 1 #11 and HA x 1SP #11 are also compatible.
- Fabric Thickness: The maximum recommended fabric thickness is 0.2 cm (1/12").
- Embroidery Design Size: For monogramming, font size should be 10 mm or larger to prevent distortion. For general embroidery designs, the design size should not be enlarged more than 120% or reduced less than 80% to avoid distortion.
- Bobbin Thread: The recommended bobbin thread is #90, 205 (dtex), 185 (D) 100% Polyester Spun (white).
- App Version: The app version can be checked in the Settings screen, e.g., Version: 1.5.4.
- Firmware: The machine's firmware version can be viewed in the Machine Settings, e.g., Firmware 200.1.
Usage Features:
- Initialization and Setup: The machine requires a specific initialization sequence, including turning on the power, checking the START/STOP button status, raising the handwheel to its highest position, pushing the bobbin winder spindle to the left, and raising the presser foot lifter.
- Wireless Connection Management: Users can switch between Access Point Mode (direct connection) and Client Mode (via router). The wireless LAN light indicates the connection status (blinking rapidly for starting communication, blinking slowly for Access Point mode, ON for Client mode, OFF when disconnected).
- Thread Management:
- Needle Threading: Instructions emphasize correct threading of both needle and bobbin threads.
- Thread Tension: A thread tension dial allows adjustment to prevent loops on the fabric or bobbin thread showing through. A lower number reduces tension, a higher number increases it.
- Thread Break/Run Out: The machine provides steps to resume sewing after a thread break or run out, including pulling up the needle thread, rethreading, moving the hoop position back by 10 stitches using the stitch back button (-), holding the thread end, and restarting.
- Bobbin Winding: The machine can wind bobbin thread without completing the current design. Users need to stop the machine, shift the bobbin winder spindle to the right to enter winding mode, and then shift it back to the left to resume sewing.
- Embroidery Control via App: The app displays various icons indicating the machine's status, such as "Return to the editing screen," "Paused," "Replace the color," "Move to the starting point," "Thread break," "The design is resumed," "Tracing the working area," "The sewing is finished," "Connected/Disconnected to the embroidery machine," and "No designs."
- Design Transfer: Embroidery data is sent wirelessly from the app to the machine. The machine beeps and the START/STOP button turns green upon successful reception. The app displays a confirmation screen.
- Hooping Fabric: Users are advised on proper fabric hooping, recommending the use of a stabilizer or hooping fabric and setting the fabric firmly. It also notes that thick or hard fabrics (over 0.2 cm) may not attach well.
- Troubleshooting Guidance: The manual provides detailed troubleshooting steps for common issues like machine initialization failure, connection problems, thread issues (breaks, tangles, uneven winding), needle breakage, and poor sewing results.
- Data Recovery: If the machine shuts off during sewing, users can recover the data by removing the hoop, cutting the thread, initializing the machine, restarting the app, connecting to the device, and selecting "Recover" in the app.
- Help Guide and Design Restoration: The app allows users to restore the help guide and built-in embroidery designs from the "Collections" screen via the Settings icon.
Maintenance Features:
- Cleaning: In case of tangled threads or rattling sounds, users are instructed to remove the needle plate and hook to clean the hook area.
- Oiling: The manual explicitly states that "Oiling is not necessary for this embroidery machine," simplifying maintenance for users.
- Needle Replacement: When a needle breaks, users are advised to turn off the power, replace the needle as instructed in the manual, and ensure it is correctly inserted.
- Bobbin Winder Spindle Maintenance: If the bobbin winder spindle gets tangled, users should cut the thread, remove the bobbin, and use tweezers to remove tangled threads from the spindle.
- Bobbin Winding Adjustment: If the bobbin is not wound evenly, an adjusting screw on the bobbin winder thread guide can be turned right or left to correct the winding. Users are cautioned not to turn the screw too hard.
Need help?
General
To Next Page
