User Manual: Interactive Digital Signage
SW602296 Rev A, Page 32 of 39
Chapter 7: Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor
or Computer Module. They are not user-serviceable.
Do not block or insert anything inside any of the ventilation slots.
The touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only
fits into a grounded outlet. Do not fit or modify the plug into an outlet that has not been
configured for this purpose. Do not use a damaged power cord. Only use the power cord that
came with your Elo Touchmonitor. Use of an unauthorized power cord may invalidate your
warranty.
Ensure that the system is maintained and runs within the specified environmental conditions
listed in the products specifications available on the Elo Touch Solutions website
www.elotouch.com.
Environmental conditions for transportation and storage
Temperature:
Portrait and Landscape Mode:
Operating 0°C to 40°C
Storage/Transportation -20°C to 50°C
Table Top Mode
Operating Temperature (Independent of altitude): 0°C to 35°C
Non-Operating Temperature (Independent of altitude): -20°C to 50°C
With OPS module:
Operating Temperature (Independent of altitude): 0°C to 35°C
Non-Operating Temperature (Independent of altitude): -20°C to 50°C
Humidity (non-condensing) :
Operating 20% to 80%
Storage/Transportation 10% to 95%
Altitude:
Operating 0 to 3,658m
Storage/Transportation 0 to 12,192m
To Next Page
Loading...
Need help?
General
