C:\Program Files\Elprotronic\USB FlashPro430\API-DLL-Demo\JTAG-Stream\Release
executable file uses standard DLLs (attached in this subdirectory). To create JTAG sequences run the
executable file with argument contains JTAG sequences in hex string. For the example described
above 0x0, 0xD, 0x8, 0x1 following program with argument 0D81 should be executed from the
DOS Command Prompt box.
FPA_JTAGStream-Demo.exe 0D81
from subdirectory
C:\Program Files\Elprotronic\USB FlashPro430\API-DLL-Demo\JTAG-Stream\Release
JTAG sequence as described above will be generated and states of all JTAG I/O lines will displayed
on the screen.
111
To Next Page
Loading...