4.1 Multi-FPA instructions
The Multi-FPA API-DLL instructions are related to Multi-FPA selector only. These
instructions allows to initialize all single applications dlls and select the instruction patch between
application software and desired FPA and sequential/simultaneous instructions transfer management
Up to sixteen independent FPAs can be remotely controlled from the application software. All
instructions from application software can be transferred to one selected FPA or to all FPAs at once.
That feature allows to increase programming speed and also allows to have individual access to any
FPA is required.
F_Trace_ON
F_Trace_ON - This function activate the tracing.
The F_Trace_ON() opens the DLLtrace.txt file located in the current directory and records all API-
DLL instructions called from the application software. This feature is useful for debugging. When
debugging is not required then tracing should be disabled. Communication history recorded in the
in the last session can be viewed in the DLLtrace.txt located in the directory where the API-DLL
file is located. When the new session is established then the file DLLtrace.txt is erased and new
trace history is recorded.
Note: Tracing is slowing the time execution, because all information passed from application
software to API-DLL are recorded in the dlltrace.txt file.
Syntax:
void MSPPRG_API F_Trace_ON( void );
F_Trace_OFF
F_Trace_OFF - Disable tracing, See F_Trace_ON for details.
Syntax:
void MSPPRG_API F_Trace_OFF( void );
36
To Next Page
Loading...